Magtek USB (UNIVERSAL SERIAL BUS) FULL SIZE SWIPE READER Uživatelský manuál

USB (UNIVERSAL SERIAL BUS) FULL SIZE SWIPE READER TECHNICAL REFERENCE MANUAL Manual Part Number 99875204 Rev 4 JUNE 2003 REGIST

USB Swipe Reader 4 6.5"(165.1 mm)1.75"(44.45 mm)6.5"(165.1 mm)1.625"(41.28 mm) Figure 1-2. Dimensions

SECTION 2. INSTALLATION This section describes the cable connection, the Windows Plug and Play Setup, and the physical mounting of the unit. USB C

USB Swipe Reader 6 WINDOWS PLUG AND PLAY SETUP On hosts with the Windows operating system, the first time the device is plugged into a specific

SECTION 3. OPERATION This section describes the LED Indicator and Card Read. LED INDICATOR The LED indicator will be either off, red, or green.

USB Swipe Reader 8

9SECTION 4. USB COMMUNICATIONS This device conforms to the USB specification revision 1.1. This device also conforms with the Human Interface Devi

USB Swipe Reader 10 following table. The usage types are also listed. These usage types are defined in the HID Usage Tables document. Magneti

Section 4. USB Communications 11 Item Value(Hex)Usage (Card encode type) 09 38 Report Count (7) 95 07 Input (Data, Variable, Absolute, Bit Fie

USB Swipe Reader 12 TRACK 1 DECODE STATUS Bits 7-1 0 Value Reserved Error This is a one-byte value, which indicates the status of decoding tr

Section 4. USB Communications 13CARD ENCODE TYPE This one byte value indicates the type of encoding that was found on the card. The following

ii Copyright© 2001-2005 MagTek®, Inc. Printed in the United States of America Information in this document is subject to change without notice. No

USB Swipe Reader 14 COMMANDS Most host applications do not need to send commands to the device. Most host applications only need to obtain car

Section 4. USB Communications 15RESULT CODE This one byte field contains the value of the result code. There are two types of result codes: g

USB Swipe Reader 16 Property ID is a one byte field that contains a value that identifies the property. The following table lists all the curren

Section 4. USB Communications 17SERIAL_NUM PROPERTY Property ID: 1 Property Type: String Length: 0 – 15 bytes Get Property: Yes Set P

USB Swipe Reader 18 will be sent to the host when the host requests the device’s USB endpoint descriptor. When this property is changed, the un

SECTION 5. DEMO PROGRAM The demo program, which is written in Visual Basic, can be used to do the following: • Read cards from the device and view

USB Swipe Reader 20 SOURCE CODE Source code is included with the demo program. It can be used as a guide for application development. It is d

iiiLIMITED WARRANTY MagTek warrants that the products sold to Reseller pursuant to this Agreement will perform in accordance with MagTek’s published

iv FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of FCC

vTABLE OF CONTENTS SECTION 1. FEATURES AND SPECIFICATIONS...1 FEAT

Figure 1-1. USB Full Size Swipe Reader vi

SECTION 1. FEATURES AND SPECIFICATIONS The USB (Universal Serial Bus), Full Size, Swipe Reader is a compact magnetic stripe card reader which confo

USB Swipe Reader CONFIGURATIONS The Configurations are as follows: Part Number Tracks Color 21088065 TK 1,2,3 Pearl White ACCESSORIES

Section 1. Features and Specifications Table 1-2. Specifications Reference Standards ISO 7810 and ISO 7811/CDL/ AAMVA* Power Input 5V From U